from nmigen import Elaboratable, Module, Signal
from nmigen.cli import rtlil
+from nmigen.cli import main
+import sys
from soc.decoder.decode2execute1 import Data
from soc.experiment.testmem import TestMemory # test only for instructions
from soc.simple.core import NonProductionCore
from soc.config.test.test_loadstore import TestMemPspec
from soc.config.ifetch import ConfigFetchUnit
+from soc.decoder.power_enums import MicrOp
class TestIssuer(Elaboratable):
self.iprev_adr = Signal(64) # previous address: if different, do read
# instruction go/monitor
- self.go_insn_i = Signal(reset_less=True)
+ self.go_insn_i = Signal()
self.pc_o = Signal(64, reset_less=True)
- self.pc_i = Data(64, "pc") # set "ok" to indicate "please change me"
- self.busy_o = core.busy_o
+ self.pc_i = Data(64, "pc_i") # set "ok" to indicate "please change me"
+ self.core_start_i = Signal()
+ self.core_stop_i = Signal()
+ self.core_bigendian_i = Signal()
+ self.busy_o = Signal(reset_less=True)
+ self.halted_o = Signal(reset_less=True)
self.memerr_o = Signal(reset_less=True)
- # FAST regfile read /write ports
- self.fast_rd1 = self.core.regs.rf['fast'].r_ports['d_rd1']
- self.fast_wr1 = self.core.regs.rf['fast'].w_ports['d_wr1']
+ # FAST regfile read /write ports for PC and MSR
+ self.fast_r_pc = self.core.regs.rf['fast'].r_ports['cia'] # PC rd
+ self.fast_w_pc = self.core.regs.rf['fast'].w_ports['d_wr1'] # PC wr
+ self.fast_r_msr = self.core.regs.rf['fast'].r_ports['msr'] # MSR rd
+
# hack method of keeping an eye on whether branch/trap set the PC
self.fast_nia = self.core.regs.rf['fast'].w_ports['nia']
self.fast_nia.wen.name = 'fast_nia_wen'
m.submodules.core = core = self.core
m.submodules.imem = imem = self.imem
+ # busy/halted signals from core
+ comb += self.busy_o.eq(core.busy_o)
+ comb += self.halted_o.eq(core.core_terminated_o)
+ comb += core.core_start_i.eq(self.core_start_i)
+ comb += core.core_stop_i.eq(self.core_stop_i)
+ comb += core.bigendian_i.eq(self.core_bigendian_i)
+
# temporary hack: says "go" immediately for both address gen and ST
l0 = core.l0
ldst = core.fus.fus['ldst0']
- m.d.comb += ldst.ad.go.eq(ldst.ad.rel) # link addr-go direct to rel
- m.d.comb += ldst.st.go.eq(ldst.st.rel) # link store-go direct to rel
+ m.d.comb += ldst.ad.go_i.eq(ldst.ad.rel_o) # link addr-go direct to rel
+ m.d.comb += ldst.st.go_i.eq(ldst.st.rel_o) # link store-go direct to rel
# PC and instruction from I-Memory
current_insn = Signal(32) # current fetched instruction (note sync)
comb += self.pc_o.eq(cur_pc)
ilatch = Signal(32)
+ # MSR (temp and latched)
+ cur_msr = Signal(64) # current MSR (note it is reset/sync)
+ msr = Signal(64, reset_less=True)
+
# next instruction (+4 on current)
nia = Signal(64, reset_less=True)
comb += nia.eq(cur_pc + 4)
core_be_i = core.bigendian_i # bigendian mode
core_opcode_i = core.raw_opcode_i # raw opcode
+ insn_type = core.pdecode2.e.do.insn_type
+ insn_msr = core.pdecode2.msr
+ insn_cia = core.pdecode2.cia
+
# only run if not in halted state
with m.If(~core.core_terminated_o):
# actually use a nmigen FSM for the first time (w00t)
+ # this FSM is perhaps unusual in that it detects conditions
+ # then "holds" information, combinatorially, for the core
+ # (as opposed to using sync - which would be on a clock's delay)
+ # this includes the actual opcode, valid flags and so on.
with m.FSM() as fsm:
# waiting (zzz)
comb += pc.eq(self.pc_i.data)
with m.Else():
# otherwise read FastRegs regfile for PC
- comb += self.fast_rd1.ren.eq(1<<FastRegs.PC)
- comb += pc.eq(self.fast_rd1.data_o)
+ comb += self.fast_r_pc.ren.eq(1<<FastRegs.PC)
+ comb += pc.eq(self.fast_r_pc.data_o)
# capture the PC and also drop it into Insn Memory
# we have joined a pair of combinatorial memory
# lookups together. this is Generally Bad.
comb += self.imem.f_valid_i.eq(1)
with m.Else():
# not busy: instruction fetched
- insn = self.imem.f_instr_o.word_select(cur_pc[2], 32)
+ f_instr_o = self.imem.f_instr_o
+ if f_instr_o.width == 32:
+ insn = f_instr_o
+ else:
+ insn = f_instr_o.word_select(cur_pc[2], 32)
comb += current_insn.eq(insn)
- comb += core_ivalid_i.eq(1) # say instruction is valid
+ comb += core_ivalid_i.eq(1) # instruction is valid
comb += core_issue_i.eq(1) # and issued
- comb += core_be_i.eq(0) # little-endian mode
comb += core_opcode_i.eq(current_insn) # actual opcode
- sync += ilatch.eq(current_insn)
+ sync += ilatch.eq(current_insn) # latch current insn
+
+ # read MSR, latch it, and put it in decode "state"
+ comb += self.fast_r_msr.ren.eq(1<<FastRegs.MSR)
+ comb += msr.eq(self.fast_r_msr.data_o)
+ comb += insn_msr.eq(msr)
+ sync += cur_msr.eq(msr) # latch current MSR
+
+ # also drop PC into decode "state"
+ comb += insn_cia.eq(cur_pc)
+
m.next = "INSN_ACTIVE" # move to "wait completion"
# instruction started: must wait till it finishes
with m.State("INSN_ACTIVE"):
- comb += core_ivalid_i.eq(1) # say instruction is valid
- comb += core_opcode_i.eq(ilatch) # actual opcode
- with m.If(self.fast_nia.wen):
- sync += pc_changed.eq(1)
- with m.If(~core_busy_o): # instruction done!
- # ok here we are not reading the branch unit. TODO
- # this just blithely overwrites whatever pipeline
- # updated the PC
- with m.If(~pc_changed):
- comb += self.fast_wr1.wen.eq(1<<FastRegs.PC)
- comb += self.fast_wr1.data_i.eq(nia)
- m.next = "IDLE" # back to idle
+ with m.If(core.core_terminated_o):
+ m.next = "IDLE" # back to idle, immediately (OP_ATTN)
+ with m.Else():
+ with m.If(insn_type != MicrOp.OP_NOP):
+ comb += core_ivalid_i.eq(1) # instruction is valid
+ comb += core_opcode_i.eq(ilatch) # actual opcode
+ comb += insn_msr.eq(cur_msr) # and MSR
+ comb += insn_cia.eq(cur_pc) # and PC
+ with m.If(self.fast_nia.wen):
+ sync += pc_changed.eq(1)
+ with m.If(~core_busy_o): # instruction done!
+ # ok here we are not reading the branch unit. TODO
+ # this just blithely overwrites whatever pipeline
+ # updated the PC
+ with m.If(~pc_changed):
+ comb += self.fast_w_pc.wen.eq(1<<FastRegs.PC)
+ comb += self.fast_w_pc.data_i.eq(nia)
+ m.next = "IDLE" # back to idle
return m
yield self.memerr_o
yield from self.core.ports()
yield from self.imem.ports()
+ yield self.core_start_i
+ yield self.core_stop_i
+ yield self.core_bigendian_i
+ yield self.busy_o
+ yield self.halted_o
+
+ def ports(self):
+ return list(self)
+
+ def external_ports(self):
+ return self.pc_i.ports() + [self.pc_o,
+ self.go_insn_i,
+ self.memerr_o,
+ self.core_start_i,
+ self.core_stop_i,
+ self.core_bigendian_i,
+ self.busy_o,
+ self.halted_o,
+ ] + \
+ list(self.imem.ibus.fields.values()) + \
+ list(self.core.l0.cmpi.lsmem.lsi.dbus.fields.values())
+
def ports(self):
return list(self)
reg_wid=64,
units=units)
dut = TestIssuer(pspec)
- vl = rtlil.convert(dut, ports=dut.ports(), name="test_issuer")
- with open("test_issuer.il", "w") as f:
- f.write(vl)
+ vl = main(dut, ports=dut.ports(), name="test_issuer")
+ if len(sys.argv) == 1:
+ vl = rtlil.convert(dut, ports=dut.external_ports(), name="test_issuer")
+ with open("test_issuer.il", "w") as f:
+ f.write(vl)
projects / soc.git / blobdiff