+# SPDX-License-Identifier: LGPLv3+
+# Copyright (C) 2020, 2021 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+# Copyright (C) 2020 Michael Nolan
+# Funded by NLnet http://nlnet.nl
"""core of the python-based POWER9 simulator
this is part of a cycle-accurate POWER9 simulator. its primary purpose is
not speed, it is for both learning and educational purposes, as well as
a method of verifying the HDL.
+
+related bugs:
+
+* https://bugs.libre-soc.org/show_bug.cgi?id=424
"""
+from nmigen.back.pysim import Settle
from functools import wraps
+from copy import copy
from soc.decoder.orderedset import OrderedSet
from soc.decoder.selectable_int import (FieldSelectableInt, SelectableInt,
selectconcat)
from soc.decoder.power_enums import (spr_dict, spr_byname, XER_bits,
- insns, InternalOp)
-from soc.decoder.helpers import exts, trunc_div, trunc_rem
-from soc.consts import PI, MSR
+ insns, MicrOp, In1Sel, In2Sel, In3Sel,
+ OutSel, CROutSel)
+from soc.decoder.helpers import exts, gtu, ltu, undefined
+from soc.consts import PIb, MSRb # big-endian (PowerISA versions)
+from soc.decoder.power_svp64 import SVP64RM, decode_extra
from collections import namedtuple
import math
import sys
instruction_info = namedtuple('instruction_info',
- 'func read_regs uninit_regs write_regs ' + \
+ 'func read_regs uninit_regs write_regs ' +
'special_regs op_fields form asmregs')
special_sprs = {
return x
+REG_SORT_ORDER = {
+ # TODO (lkcl): adjust other registers that should be in a particular order
+ # probably CA, CA32, and CR
+ "RT": 0,
+ "RA": 0,
+ "RB": 0,
+ "RS": 0,
+ "CR": 0,
+ "LR": 0,
+ "CTR": 0,
+ "TAR": 0,
+ "CA": 0,
+ "CA32": 0,
+ "MSR": 0,
+
+ "overflow": 1,
+}
+
+
def create_args(reglist, extra=None):
- args = OrderedSet()
- for reg in reglist:
- args.add(reg)
- args = list(args)
- if extra:
- args = [extra] + args
- return args
+ retval = list(OrderedSet(reglist))
+ retval.sort(key=lambda reg: REG_SORT_ORDER[reg])
+ if extra is not None:
+ return [extra] + retval
+ return retval
+
+
+# very quick, TODO move to SelectableInt utils later
+def genmask(shift, size):
+ res = SelectableInt(0, size)
+ for i in range(size):
+ if i < shift:
+ res[size-1-i] = SelectableInt(1, 1)
+ return res
+
+"""
+ Get Root Page
+
+ //Accessing 2nd double word of partition table (pate1)
+ //Ref: Power ISA Manual v3.0B, Book-III, section 5.7.6.1
+ // PTCR Layout
+ // ====================================================
+ // -----------------------------------------------
+ // | /// | PATB | /// | PATS |
+ // -----------------------------------------------
+ // 0 4 51 52 58 59 63
+ // PATB[4:51] holds the base address of the Partition Table,
+ // right shifted by 12 bits.
+ // This is because the address of the Partition base is
+ // 4k aligned. Hence, the lower 12bits, which are always
+ // 0 are ommitted from the PTCR.
+ //
+ // Thus, The Partition Table Base is obtained by (PATB << 12)
+ //
+ // PATS represents the partition table size right-shifted by 12 bits.
+ // The minimal size of the partition table is 4k.
+ // Thus partition table size = (1 << PATS + 12).
+ //
+ // Partition Table
+ // ====================================================
+ // 0 PATE0 63 PATE1 127
+ // |----------------------|----------------------|
+ // | | |
+ // |----------------------|----------------------|
+ // | | |
+ // |----------------------|----------------------|
+ // | | | <-- effLPID
+ // |----------------------|----------------------|
+ // .
+ // .
+ // .
+ // |----------------------|----------------------|
+ // | | |
+ // |----------------------|----------------------|
+ //
+ // The effective LPID forms the index into the Partition Table.
+ //
+ // Each entry in the partition table contains 2 double words, PATE0, PATE1,
+ // corresponding to that partition.
+ //
+ // In case of Radix, The structure of PATE0 and PATE1 is as follows.
+ //
+ // PATE0 Layout
+ // -----------------------------------------------
+ // |1|RTS1|/| RPDB | RTS2 | RPDS |
+ // -----------------------------------------------
+ // 0 1 2 3 4 55 56 58 59 63
+ //
+ // HR[0] : For Radix Page table, first bit should be 1.
+ // RTS1[1:2] : Gives one fragment of the Radix treesize
+ // RTS2[56:58] : Gives the second fragment of the Radix Tree size.
+ // RTS = (RTS1 << 3 + RTS2) + 31.
+ //
+ // RPDB[4:55] = Root Page Directory Base.
+ // RPDS = Logarithm of Root Page Directory Size right shifted by 3.
+ // Thus, Root page directory size = 1 << (RPDS + 3).
+ // Note: RPDS >= 5.
+ //
+ // PATE1 Layout
+ // -----------------------------------------------
+ // |///| PRTB | // | PRTS |
+ // -----------------------------------------------
+ // 0 3 4 51 52 58 59 63
+ //
+ // PRTB[4:51] = Process Table Base. This is aligned to size.
+ // PRTS[59: 63] = Process Table Size right shifted by 12.
+ // Minimal size of the process table is 4k.
+ // Process Table Size = (1 << PRTS + 12).
+ // Note: PRTS <= 24.
+ //
+ // Computing the size aligned Process Table Base:
+ // table_base = (PRTB & ~((1 << PRTS) - 1)) << 12
+ // Thus, the lower 12+PRTS bits of table_base will
+ // be zero.
+
+
+ //Ref: Power ISA Manual v3.0B, Book-III, section 5.7.6.2
+ //
+ // Process Table
+ // ==========================
+ // 0 PRTE0 63 PRTE1 127
+ // |----------------------|----------------------|
+ // | | |
+ // |----------------------|----------------------|
+ // | | |
+ // |----------------------|----------------------|
+ // | | | <-- effPID
+ // |----------------------|----------------------|
+ // .
+ // .
+ // .
+ // |----------------------|----------------------|
+ // | | |
+ // |----------------------|----------------------|
+ //
+ // The effective Process id (PID) forms the index into the Process Table.
+ //
+ // Each entry in the partition table contains 2 double words, PRTE0, PRTE1,
+ // corresponding to that process
+ //
+ // In case of Radix, The structure of PRTE0 and PRTE1 is as follows.
+ //
+ // PRTE0 Layout
+ // -----------------------------------------------
+ // |/|RTS1|/| RPDB | RTS2 | RPDS |
+ // -----------------------------------------------
+ // 0 1 2 3 4 55 56 58 59 63
+ //
+ // RTS1[1:2] : Gives one fragment of the Radix treesize
+ // RTS2[56:58] : Gives the second fragment of the Radix Tree size.
+ // RTS = (RTS1 << 3 + RTS2) << 31,
+ // since minimal Radix Tree size is 4G.
+ //
+ // RPDB = Root Page Directory Base.
+ // RPDS = Root Page Directory Size right shifted by 3.
+ // Thus, Root page directory size = RPDS << 3.
+ // Note: RPDS >= 5.
+ //
+ // PRTE1 Layout
+ // -----------------------------------------------
+ // | /// |
+ // -----------------------------------------------
+ // 0 63
+ // All bits are reserved.
+
+
+"""
+
+# see qemu/target/ppc/mmu-radix64.c for reference
+class RADIX:
+ def __init__(self, mem, caller):
+ self.mem = mem
+ self.caller = caller
+
+ # cached page table stuff
+ self.pgtbl0 = 0
+ self.pt0_valid = False
+ self.pgtbl3 = 0
+ self.pt3_valid = False
+
+ def __call__(self,*args, **kwargs):
+ print("TODO: implement RADIX.__call__()")
+ print(args)
+ print(kwargs)
+ return None
+
+ def ld(self, address, width=8, swap=True, check_in_mem=False):
+ print("RADIX: ld from addr 0x%x width %d" % (address, width))
+
+ pte = self._walk_tree()
+ # use pte to caclculate phys address
+ return self.mem.ld(address, width, swap, check_in_mem)
+
+ # TODO implement
+ def st(self, addr, v, width=8, swap=True):
+ print("RADIX: st to addr 0x%x width %d data %x" % (addr, width, v))
+ # use pte to caclculate phys address (addr)
+ return self.mem.st(addr, v, width, swap)
+
+ def memassign(self, addr, sz, val):
+ print("memassign", addr, sz, val)
+ self.st(addr.value, val.value, sz, swap=False)
+
+ def _next_level(self):
+ return True
+ ## DSISR_R_BADCONFIG
+ ## read_entry
+ ## DSISR_NOPTE
+ ## Prepare for next iteration
+
+ def _walk_tree(self):
+ """walk tree
+
+ // vaddr 64 Bit
+ // vaddr |-----------------------------------------------------|
+ // | Unused | Used |
+ // |-----------|-----------------------------------------|
+ // | 0000000 | usefulBits = X bits (typically 52) |
+ // |-----------|-----------------------------------------|
+ // | |<--Cursize---->| |
+ // | | Index | |
+ // | | into Page | |
+ // | | Directory | |
+ // |-----------------------------------------------------|
+ // | |
+ // V |
+ // PDE |---------------------------| |
+ // |V|L|//| NLB |///|NLS| |
+ // |---------------------------| |
+ // PDE = Page Directory Entry |
+ // [0] = V = Valid Bit |
+ // [1] = L = Leaf bit. If 0, then |
+ // [4:55] = NLB = Next Level Base |
+ // right shifted by 8 |
+ // [59:63] = NLS = Next Level Size |
+ // | NLS >= 5 |
+ // | V
+ // | |--------------------------|
+ // | | usfulBits = X-Cursize |
+ // | |--------------------------|
+ // |---------------------><--NLS-->| |
+ // | Index | |
+ // | into | |
+ // | PDE | |
+ // |--------------------------|
+ // |
+ // If the next PDE obtained by |
+ // (NLB << 8 + 8 * index) is a |
+ // nonleaf, then repeat the above. |
+ // |
+ // If the next PDE is a leaf, |
+ // then Leaf PDE structure is as |
+ // follows |
+ // |
+ // |
+ // Leaf PDE |
+ // |------------------------------| |----------------|
+ // |V|L|sw|//|RPN|sw|R|C|/|ATT|EAA| | usefulBits |
+ // |------------------------------| |----------------|
+ // [0] = V = Valid Bit |
+ // [1] = L = Leaf Bit = 1 if leaf |
+ // PDE |
+ // [2] = Sw = Sw bit 0. |
+ // [7:51] = RPN = Real Page Number, V
+ // real_page = RPN << 12 -------------> Logical OR
+ // [52:54] = Sw Bits 1:3 |
+ // [55] = R = Reference |
+ // [56] = C = Change V
+ // [58:59] = Att = Physical Address
+ // 0b00 = Normal Memory
+ // 0b01 = SAO
+ // 0b10 = Non Idenmpotent
+ // 0b11 = Tolerant I/O
+ // [60:63] = Encoded Access
+ // Authority
+ //
+ """
+ # walk tree starts on prtbl
+ while True:
+ ret = self._next_level()
+ if ret: return ret
+
+ def _decode_prte(self, data):
+ """PRTE0 Layout
+ -----------------------------------------------
+ |/|RTS1|/| RPDB | RTS2 | RPDS |
+ -----------------------------------------------
+ 0 1 2 3 4 55 56 58 59 63
+ """
+ # note that SelectableInt does big-endian! so the indices
+ # below *directly* match the spec, unlike microwatt which
+ # has to turn them around (to LE)
+ zero = SelectableInt(0, 1)
+ rts = selectconcat(zero,
+ data[56:59], # RTS2
+ data[1:3], # RTS1
+ )
+ masksize = data[59:64] # RPDS
+ mbits = selectconcat(zero, masksize)
+ pgbase = selectconcat(data[8:56], # part of RPDB
+ SelectableInt(0, 16),)
+
+ return (rts, mbits, pgbase)
+
+ def _segment_check(self, addr, mbits, shift):
+ """checks segment valid
+ mbits := '0' & r.mask_size;
+ v.shift := r.shift + (31 - 12) - mbits;
+ nonzero := or(r.addr(61 downto 31) and not finalmask(30 downto 0));
+ if r.addr(63) /= r.addr(62) or nonzero = '1' then
+ v.state := RADIX_FINISH;
+ v.segerror := '1';
+ elsif mbits < 5 or mbits > 16 or mbits > (r.shift + (31 - 12)) then
+ v.state := RADIX_FINISH;
+ v.badtree := '1';
+ else
+ v.state := RADIX_LOOKUP;
+ """
+ # note that SelectableInt does big-endian! so the indices
+ # below *directly* match the spec, unlike microwatt which
+ # has to turn them around (to LE)
+ mask = genmask(shift, 43)
+ nonzero = addr[1:32] & mask[12:43] # mask 31 LSBs (BE numbered 12:43)
+ print ("RADIX _segment_check nonzero", bin(nonzero.value))
+ print ("RADIX _segment_check addr[0-1]", addr[0].value, addr[1].value)
+ if addr[0] != addr[1] or nonzero == 1:
+ return "segerror"
+ limit = shift + (31 - 12)
+ if mbits < 5 or mbits > 16 or mbits > limit:
+ return "badtree"
+ new_shift = shift + (31 - 12) - mbits
+ return new_shift
+
+ def _check_perms(self):
+ """check page permissions
+ -- test leaf bit
+ if data(62) = '1' then
+ -- check permissions and RC bits
+ perm_ok := '0';
+ if r.priv = '1' or data(3) = '0' then
+ if r.iside = '0' then
+ perm_ok := data(1) or (data(2) and not r.store);
+ else
+ -- no IAMR, so no KUEP support for now
+ -- deny execute permission if cache inhibited
+ perm_ok := data(0) and not data(5);
+ end if;
+ end if;
+ rc_ok := data(8) and (data(7) or not r.store);
+ if perm_ok = '1' and rc_ok = '1' then
+ v.state := RADIX_LOAD_TLB;
+ else
+ v.state := RADIX_FINISH;
+ v.perm_err := not perm_ok;
+ -- permission error takes precedence over RC error
+ v.rc_error := perm_ok;
+ end if;
+ """
+
+ def _get_prtable_addr(self, prtbl, addr):
+ """
+ if r.addr(63) = '1' then
+ effpid := x"00000000";
+ else
+ effpid := r.pid;
+ end if;
+ prtable_addr := x"00" & r.prtbl(55 downto 36) &
+ ((r.prtbl(35 downto 12) and not finalmask(23 downto 0)) or
+ (effpid(31 downto 8) and finalmask(23 downto 0))) &
+ effpid(7 downto 0) & "0000";
+ """
+
+ def _get_pgtable_addr(self):
+ """
+ pgtable_addr := x"00" & r.pgbase(55 downto 19) &
+ ((r.pgbase(18 downto 3) and not mask) or (addrsh and mask)) &
+ "000";
+ """
+
+ def _get_pte(self):
+ """
+ pte := x"00" &
+ ((r.pde(55 downto 12) and not finalmask) or (r.addr(55 downto 12) and finalmask))
+ & r.pde(11 downto 0);
+ """
class Mem:
self.mem = {}
self.bytes_per_word = row_bytes
self.word_log2 = math.ceil(math.log2(row_bytes))
- print ("Sim-Mem", initial_mem, self.bytes_per_word, self.word_log2)
+ print("Sim-Mem", initial_mem, self.bytes_per_word, self.word_log2)
if not initial_mem:
return
# BE/LE mode?
shifter = remainder * 8
mask = (1 << (wid * 8)) - 1
- print ("width,rem,shift,mask", wid, remainder, hex(shifter), hex(mask))
+ print("width,rem,shift,mask", wid, remainder, hex(shifter), hex(mask))
return shifter, mask
# TODO: Implement ld/st of lesser width
if width != self.bytes_per_word:
shifter, mask = self._get_shifter_mask(width, remainder)
- print ("masking", hex(val), hex(mask<<shifter), shifter)
+ print("masking", hex(val), hex(mask << shifter), shifter)
val = val & (mask << shifter)
val >>= shifter
if swap:
staddr = addr
remainder = addr & (self.bytes_per_word - 1)
addr = addr >> self.word_log2
- print("Writing 0x{:x} to ST 0x{:x} memaddr 0x{:x}/{:x}".format(v,
- staddr, addr, remainder, swap))
+ print("Writing 0x{:x} to ST 0x{:x} "
+ "memaddr 0x{:x}/{:x}".format(v, staddr, addr, remainder, swap))
assert remainder & (width - 1) == 0, "Unaligned access unsupported!"
if swap:
v = swap_order(v, width)
print("mem @ 0x{:x}: 0x{:x}".format(addr, self.mem[addr]))
def __call__(self, addr, sz):
- val = self.ld(addr.value, sz)
- print ("memread", addr, sz, val)
+ val = self.ld(addr.value, sz, swap=False)
+ print("memread", addr, sz, val)
return SelectableInt(val, sz*8)
def memassign(self, addr, sz, val):
- print ("memassign", addr, sz, val)
- self.st(addr.value, val.value, sz)
+ print("memassign", addr, sz, val)
+ self.st(addr.value, val.value, sz, swap=False)
class GPR(dict):
- def __init__(self, decoder, regfile):
+ def __init__(self, decoder, isacaller, svstate, regfile):
dict.__init__(self)
self.sd = decoder
+ self.isacaller = isacaller
+ self.svstate = svstate
for i in range(32):
self[i] = SelectableInt(regfile[i], 64)
self.form = form
def getz(self, rnum):
- #rnum = rnum.value # only SelectableInt allowed
+ # rnum = rnum.value # only SelectableInt allowed
print("GPR getzero", rnum)
if rnum == 0:
return SelectableInt(0, 64)
return rnum
def ___getitem__(self, attr):
- print("GPR getitem", attr)
+ """ XXX currently not used
+ """
rnum = self._get_regnum(attr)
+ offs = self.svstate.srcstep
+ print("GPR getitem", attr, rnum, "srcoffs", offs)
return self.regfile[rnum]
def dump(self):
s = ' '.join(s)
print("reg", "%2d" % i, s)
+
class PC:
def __init__(self, pc_init=0):
self.CIA = SelectableInt(pc_init, 64)
- self.NIA = self.CIA + SelectableInt(4, 64)
+ self.NIA = self.CIA + SelectableInt(4, 64) # only true for v3.0B!
+
+ def update_nia(self, is_svp64):
+ increment = 8 if is_svp64 else 4
+ self.NIA = self.CIA + SelectableInt(increment, 64)
- def update(self, namespace):
+ def update(self, namespace, is_svp64):
+ """updates the program counter (PC) by 4 if v3.0B mode or 8 if SVP64
+ """
self.CIA = namespace['NIA'].narrow(64)
- self.NIA = self.CIA + SelectableInt(4, 64)
+ self.update_nia(is_svp64)
namespace['CIA'] = self.CIA
namespace['NIA'] = self.NIA
+# Simple-V: see https://libre-soc.org/openpower/sv
+class SVP64State:
+ def __init__(self, init=0):
+ self.spr = SelectableInt(init, 32)
+ # fields of SVSTATE, see https://libre-soc.org/openpower/sv/sprs/
+ self.maxvl = FieldSelectableInt(self.spr, tuple(range(0,7)))
+ self.vl = FieldSelectableInt(self.spr, tuple(range(7,14)))
+ self.srcstep = FieldSelectableInt(self.spr, tuple(range(14,21)))
+ self.dststep = FieldSelectableInt(self.spr, tuple(range(21,28)))
+ self.subvl = FieldSelectableInt(self.spr, tuple(range(28,30)))
+ self.svstep = FieldSelectableInt(self.spr, tuple(range(30,32)))
+
+
+# SVP64 ReMap field
+class SVP64RMFields:
+ def __init__(self, init=0):
+ self.spr = SelectableInt(init, 24)
+ # SVP64 RM fields: see https://libre-soc.org/openpower/sv/svp64/
+ self.mmode = FieldSelectableInt(self.spr, [0])
+ self.mask = FieldSelectableInt(self.spr, tuple(range(1,4)))
+ self.elwidth = FieldSelectableInt(self.spr, tuple(range(4,6)))
+ self.ewsrc = FieldSelectableInt(self.spr, tuple(range(6,8)))
+ self.subvl = FieldSelectableInt(self.spr, tuple(range(8,10)))
+ self.extra = FieldSelectableInt(self.spr, tuple(range(10,19)))
+ self.mode = FieldSelectableInt(self.spr, tuple(range(19,24)))
+ # these cover the same extra field, split into parts as EXTRA2
+ self.extra2 = list(range(4))
+ self.extra2[0] = FieldSelectableInt(self.spr, tuple(range(10,12)))
+ self.extra2[1] = FieldSelectableInt(self.spr, tuple(range(12,14)))
+ self.extra2[2] = FieldSelectableInt(self.spr, tuple(range(14,16)))
+ self.extra2[3] = FieldSelectableInt(self.spr, tuple(range(16,18)))
+ self.smask = FieldSelectableInt(self.spr, tuple(range(16,19)))
+ # and here as well, but EXTRA3
+ self.extra3 = list(range(3))
+ self.extra3[0] = FieldSelectableInt(self.spr, tuple(range(10,13)))
+ self.extra3[1] = FieldSelectableInt(self.spr, tuple(range(13,16)))
+ self.extra3[2] = FieldSelectableInt(self.spr, tuple(range(16,19)))
+
+
+SVP64RM_MMODE_SIZE = len(SVP64RMFields().mmode.br)
+SVP64RM_MASK_SIZE = len(SVP64RMFields().mask.br)
+SVP64RM_ELWIDTH_SIZE = len(SVP64RMFields().elwidth.br)
+SVP64RM_EWSRC_SIZE = len(SVP64RMFields().ewsrc.br)
+SVP64RM_SUBVL_SIZE = len(SVP64RMFields().subvl.br)
+SVP64RM_EXTRA2_SPEC_SIZE = len(SVP64RMFields().extra2[0].br)
+SVP64RM_EXTRA3_SPEC_SIZE = len(SVP64RMFields().extra3[0].br)
+SVP64RM_SMASK_SIZE = len(SVP64RMFields().smask.br)
+SVP64RM_MODE_SIZE = len(SVP64RMFields().mode.br)
+
+
+# SVP64 Prefix fields: see https://libre-soc.org/openpower/sv/svp64/
+class SVP64PrefixFields:
+ def __init__(self):
+ self.insn = SelectableInt(0, 32)
+ # 6 bit major opcode EXT001, 2 bits "identifying" (7, 9), 24 SV ReMap
+ self.major = FieldSelectableInt(self.insn, tuple(range(0,6)))
+ self.pid = FieldSelectableInt(self.insn, (7, 9)) # must be 0b11
+ rmfields = [6, 8] + list(range(10,32)) # SVP64 24-bit RM (ReMap)
+ self.rm = FieldSelectableInt(self.insn, rmfields)
+
+
+SV64P_MAJOR_SIZE = len(SVP64PrefixFields().major.br)
+SV64P_PID_SIZE = len(SVP64PrefixFields().pid.br)
+SV64P_RM_SIZE = len(SVP64PrefixFields().rm.br)
+
+
class SPR(dict):
def __init__(self, dec2, initial_sprs={}):
self.sd = dec2
self[key] = v
def __getitem__(self, key):
- print ("get spr", key)
- print ("dict", self.items())
+ print("get spr", key)
+ print("dict", self.items())
# if key in special_sprs get the special spr, otherwise return key
if isinstance(key, SelectableInt):
key = key.value
if isinstance(key, int):
key = spr_dict[key].SPR
key = special_sprs.get(key, key)
+ if key == 'HSRR0': # HACK!
+ key = 'SRR0'
+ if key == 'HSRR1': # HACK!
+ key = 'SRR1'
if key in self:
res = dict.__getitem__(self, key)
else:
info = spr_byname[key]
dict.__setitem__(self, key, SelectableInt(0, info.length))
res = dict.__getitem__(self, key)
- print ("spr returning", key, res)
+ print("spr returning", key, res)
return res
def __setitem__(self, key, value):
key = key.value
if isinstance(key, int):
key = spr_dict[key].SPR
- print ("spr key", key)
+ print("spr key", key)
key = special_sprs.get(key, key)
- print ("setting spr", key, value)
+ if key == 'HSRR0': # HACK!
+ self.__setitem__('SRR0', value)
+ if key == 'HSRR1': # HACK!
+ self.__setitem__('SRR1', value)
+ print("setting spr", key, value)
dict.__setitem__(self, key, value)
def __call__(self, ridx):
return self[ridx]
+def get_pdecode_idx_in(dec2, name):
+ op = dec2.dec.op
+ in1_sel = yield op.in1_sel
+ in2_sel = yield op.in2_sel
+ in3_sel = yield op.in3_sel
+ # get the IN1/2/3 from the decoder (includes SVP64 remap and isvec)
+ in1 = yield dec2.e.read_reg1.data
+ in2 = yield dec2.e.read_reg2.data
+ in3 = yield dec2.e.read_reg3.data
+ in1_isvec = yield dec2.in1_isvec
+ in2_isvec = yield dec2.in2_isvec
+ in3_isvec = yield dec2.in3_isvec
+ print ("get_pdecode_idx", in1_sel, In1Sel.RA.value, in1, in1_isvec)
+ # identify which regnames map to in1/2/3
+ if name == 'RA':
+ if (in1_sel == In1Sel.RA.value or
+ (in1_sel == In1Sel.RA_OR_ZERO.value and in1 != 0)):
+ return in1, in1_isvec
+ if in1_sel == In1Sel.RA_OR_ZERO.value:
+ return in1, in1_isvec
+ elif name == 'RB':
+ if in2_sel == In2Sel.RB.value:
+ return in2, in2_isvec
+ if in3_sel == In3Sel.RB.value:
+ return in3, in3_isvec
+ # XXX TODO, RC doesn't exist yet!
+ elif name == 'RC':
+ assert False, "RC does not exist yet"
+ elif name == 'RS':
+ if in1_sel == In1Sel.RS.value:
+ return in1, in1_isvec
+ if in2_sel == In2Sel.RS.value:
+ return in2, in2_isvec
+ if in3_sel == In3Sel.RS.value:
+ return in3, in3_isvec
+ return None, False
+
+
+def get_pdecode_cr_out(dec2, name):
+ op = dec2.dec.op
+ out_sel = yield op.cr_out
+ out_bitfield = yield dec2.dec_cr_out.cr_bitfield.data
+ sv_cr_out = yield op.sv_cr_out
+ spec = yield dec2.crout_svdec.spec
+ sv_override = yield dec2.dec_cr_out.sv_override
+ # get the IN1/2/3 from the decoder (includes SVP64 remap and isvec)
+ out = yield dec2.e.write_cr.data
+ o_isvec = yield dec2.o_isvec
+ print ("get_pdecode_cr_out", out_sel, CROutSel.CR0.value, out, o_isvec)
+ print (" sv_cr_out", sv_cr_out)
+ print (" cr_bf", out_bitfield)
+ print (" spec", spec)
+ print (" override", sv_override)
+ # identify which regnames map to out / o2
+ if name == 'CR0':
+ if out_sel == CROutSel.CR0.value:
+ return out, o_isvec
+ print ("get_pdecode_idx_out not found", name)
+ return None, False
+
+
+def get_pdecode_idx_out(dec2, name):
+ op = dec2.dec.op
+ out_sel = yield op.out_sel
+ # get the IN1/2/3 from the decoder (includes SVP64 remap and isvec)
+ out = yield dec2.e.write_reg.data
+ o_isvec = yield dec2.o_isvec
+ print ("get_pdecode_idx_out", out_sel, OutSel.RA.value, out, o_isvec)
+ # identify which regnames map to out / o2
+ if name == 'RA':
+ if out_sel == OutSel.RA.value:
+ return out, o_isvec
+ elif name == 'RT':
+ if out_sel == OutSel.RT.value:
+ return out, o_isvec
+ print ("get_pdecode_idx_out not found", name)
+ return None, False
+
+
+# XXX TODO
+def get_pdecode_idx_out2(dec2, name):
+ op = dec2.dec.op
+ print ("TODO: get_pdecode_idx_out2", name)
+ return None, False
+
class ISACaller:
# decoder2 - an instance of power_decoder2
# initial_{etc} - initial values for SPRs, Condition Register, Mem, MSR
# respect_pc - tracks the program counter. requires initial_insns
def __init__(self, decoder2, regfile, initial_sprs=None, initial_cr=0,
- initial_mem=None, initial_msr=0,
- initial_insns=None, respect_pc=False,
- disassembly=None,
- initial_pc=0):
-
+ initial_mem=None, initial_msr=0,
+ initial_svstate=0,
+ initial_insns=None, respect_pc=False,
+ disassembly=None,
+ initial_pc=0,
+ bigendian=False,
+ mmu=False):
+
+ self.bigendian = bigendian
+ self.halted = False
+ self.is_svp64_mode = False
self.respect_pc = respect_pc
if initial_sprs is None:
initial_sprs = {}
initial_insns = {}
assert self.respect_pc == False, "instructions required to honor pc"
- print ("ISACaller insns", respect_pc, initial_insns, disassembly)
+ print("ISACaller insns", respect_pc, initial_insns, disassembly)
+ print("ISACaller initial_msr", initial_msr)
# "fake program counter" mode (for unit testing)
self.fake_pc = 0
+ disasm_start = 0
if not respect_pc:
if isinstance(initial_mem, tuple):
self.fake_pc = initial_mem[0]
self.disassembly[i*4 + disasm_start] = code
# set up registers, instruction memory, data memory, PC, SPRs, MSR
- self.gpr = GPR(decoder2, regfile)
+ self.svp64rm = SVP64RM()
+ if isinstance(initial_svstate, int):
+ initial_svstate = SVP64State(initial_svstate)
+ self.svstate = initial_svstate
+ self.gpr = GPR(decoder2, self, self.svstate, regfile)
self.mem = Mem(row_bytes=8, initial_mem=initial_mem)
+ if mmu:
+ self.mem = RADIX(self.mem, self)
self.imem = Mem(row_bytes=4, initial_mem=initial_insns)
self.pc = PC()
self.spr = SPR(decoder2, initial_sprs)
- self.msr = SelectableInt(initial_msr, 64) # underlying reg
+ self.msr = SelectableInt(initial_msr, 64) # underlying reg
# TODO, needed here:
# FPR (same as GPR except for FP nums)
# 3.2.3 p46 p232 VRSAVE (actually SPR #256)
# create CR then allow portions of it to be "selectable" (below)
- self._cr = SelectableInt(initial_cr, 64) # underlying reg
- self.cr = FieldSelectableInt(self._cr, list(range(32,64)))
+ #rev_cr = int('{:016b}'.format(initial_cr)[::-1], 2)
+ self.cr = SelectableInt(initial_cr, 64) # underlying reg
+ #self.cr = FieldSelectableInt(self._cr, list(range(32, 64)))
# "undefined", just set to variable-bit-width int (use exts "max")
- self.undefined = SelectableInt(0, 256) # TODO, not hard-code 256!
+ #self.undefined = SelectableInt(0, 256) # TODO, not hard-code 256!
self.namespace = {}
self.namespace.update(self.spr)
self.namespace.update({'GPR': self.gpr,
- 'MEM': self.mem,
- 'SPR': self.spr,
- 'memassign': self.memassign,
- 'NIA': self.pc.NIA,
- 'CIA': self.pc.CIA,
- 'CR': self.cr,
- 'MSR': self.msr,
- 'undefined': self.undefined,
- 'mode_is_64bit': True,
- 'SO': XER_bits['SO']
- })
+ 'MEM': self.mem,
+ 'SPR': self.spr,
+ 'memassign': self.memassign,
+ 'NIA': self.pc.NIA,
+ 'CIA': self.pc.CIA,
+ 'CR': self.cr,
+ 'MSR': self.msr,
+ 'undefined': undefined,
+ 'mode_is_64bit': True,
+ 'SO': XER_bits['SO']
+ })
# update pc to requested start point
self.set_pc(initial_pc)
# field-selectable versions of Condition Register TODO check bitranges?
self.crl = []
for i in range(8):
- bits = tuple(range(i*4, (i+1)*4))# errr... maybe?
+ bits = tuple(range(i*4+32, (i+1)*4+32)) # errr... maybe?
_cr = FieldSelectableInt(self.cr, bits)
self.crl.append(_cr)
self.namespace["CR%d" % i] = _cr
self.decoder = decoder2.dec
self.dec2 = decoder2
- def TRAP(self, trap_addr=0x700):
- print ("TRAP:", hex(trap_addr))
+ def TRAP(self, trap_addr=0x700, trap_bit=PIb.TRAP):
+ print("TRAP:", hex(trap_addr), hex(self.namespace['MSR'].value))
# store CIA(+4?) in SRR0, set NIA to 0x700
# store MSR in SRR1, set MSR to um errr something, have to check spec
- self.spr['SRR0'] = self.pc.CIA
- self.spr['SRR1'] = self.namespace['MSR']
+ self.spr['SRR0'].value = self.pc.CIA.value
+ self.spr['SRR1'].value = self.namespace['MSR'].value
self.trap_nia = SelectableInt(trap_addr, 64)
- self.namespace['MSR'][63-PI.TRAP] = 1 # bit 45, "this is a trap"
+ self.spr['SRR1'][trap_bit] = 1 # change *copy* of MSR in SRR1
+
+ # set exception bits. TODO: this should, based on the address
+ # in figure 66 p1065 V3.0B and the table figure 65 p1063 set these
+ # bits appropriately. however it turns out that *for now* in all
+ # cases (all trap_addrs) the exact same thing is needed.
+ self.msr[MSRb.IR] = 0
+ self.msr[MSRb.DR] = 0
+ self.msr[MSRb.FE0] = 0
+ self.msr[MSRb.FE1] = 0
+ self.msr[MSRb.EE] = 0
+ self.msr[MSRb.RI] = 0
+ self.msr[MSRb.SF] = 1
+ self.msr[MSRb.TM] = 0
+ self.msr[MSRb.VEC] = 0
+ self.msr[MSRb.VSX] = 0
+ self.msr[MSRb.PR] = 0
+ self.msr[MSRb.FP] = 0
+ self.msr[MSRb.PMM] = 0
+ self.msr[MSRb.TEs] = 0
+ self.msr[MSRb.TEe] = 0
+ self.msr[MSRb.UND] = 0
+ self.msr[MSRb.LE] = 1
def memassign(self, ea, sz, val):
self.mem.memassign(ea, sz, val)
else:
sig = getattr(fields, name)
val = yield sig
- if name in ['BF', 'BFA']:
+ # these are all opcode fields involved in index-selection of CR,
+ # and need to do "standard" arithmetic. CR[BA+32] for example
+ # would, if using SelectableInt, only be 5-bit.
+ if name in ['BF', 'BFA', 'BC', 'BA', 'BB', 'BT', 'BI']:
self.namespace[name] = val
else:
self.namespace[name] = SelectableInt(val, sig.width)
self.namespace['CA32'] = self.spr['XER'][XER_bits['CA32']].value
def handle_carry_(self, inputs, outputs, already_done):
- inv_a = yield self.dec2.e.invert_a
+ inv_a = yield self.dec2.e.do.invert_in
if inv_a:
inputs[0] = ~inputs[0]
- imm_ok = yield self.dec2.e.imm_data.ok
+ imm_ok = yield self.dec2.e.do.imm_data.ok
if imm_ok:
- imm = yield self.dec2.e.imm_data.data
+ imm = yield self.dec2.e.do.imm_data.data
inputs.append(SelectableInt(imm, 64))
assert len(outputs) >= 1
- print ("outputs", repr(outputs))
+ print("outputs", repr(outputs))
if isinstance(outputs, list) or isinstance(outputs, tuple):
output = outputs[0]
else:
output = outputs
gts = []
for x in inputs:
- print ("gt input", x, output)
- gt = (x > output)
+ print("gt input", x, output)
+ gt = (gtu(x, output))
gts.append(gt)
print(gts)
cy = 1 if any(gts) else 0
+ print("CA", cy, gts)
if not (1 & already_done):
self.spr['XER'][XER_bits['CA']] = cy
- print ("inputs", inputs)
+ print("inputs", already_done, inputs)
# 32 bit carry
- gts = []
- for x in inputs:
- print ("input", x, output)
- gt = (x[32:64] > output[32:64]) == SelectableInt(1, 1)
- gts.append(gt)
- cy32 = 1 if any(gts) else 0
+ # ARGH... different for OP_ADD... *sigh*...
+ op = yield self.dec2.e.do.insn_type
+ if op == MicrOp.OP_ADD.value:
+ res32 = (output.value & (1 << 32)) != 0
+ a32 = (inputs[0].value & (1 << 32)) != 0
+ if len(inputs) >= 2:
+ b32 = (inputs[1].value & (1 << 32)) != 0
+ else:
+ b32 = False
+ cy32 = res32 ^ a32 ^ b32
+ print("CA32 ADD", cy32)
+ else:
+ gts = []
+ for x in inputs:
+ print("input", x, output)
+ print(" x[32:64]", x, x[32:64])
+ print(" o[32:64]", output, output[32:64])
+ gt = (gtu(x[32:64], output[32:64])) == SelectableInt(1, 1)
+ gts.append(gt)
+ cy32 = 1 if any(gts) else 0
+ print("CA32", cy32, gts)
if not (2 & already_done):
self.spr['XER'][XER_bits['CA32']] = cy32
def handle_overflow(self, inputs, outputs, div_overflow):
- inv_a = yield self.dec2.e.invert_a
- if inv_a:
- inputs[0] = ~inputs[0]
+ if hasattr(self.dec2.e.do, "invert_in"):
+ inv_a = yield self.dec2.e.do.invert_in
+ if inv_a:
+ inputs[0] = ~inputs[0]
- imm_ok = yield self.dec2.e.imm_data.ok
+ imm_ok = yield self.dec2.e.do.imm_data.ok
if imm_ok:
- imm = yield self.dec2.e.imm_data.data
+ imm = yield self.dec2.e.do.imm_data.data
inputs.append(SelectableInt(imm, 64))
assert len(outputs) >= 1
- print ("handle_overflow", inputs, outputs, div_overflow)
- if len(inputs) < 2 and div_overflow != 1:
+ print("handle_overflow", inputs, outputs, div_overflow)
+ if len(inputs) < 2 and div_overflow is None:
return
# div overflow is different: it's returned by the pseudo-code
# because it's more complex than can be done by analysing the output
- if div_overflow == 1:
- ov, ov32 = 1, 1
+ if div_overflow is not None:
+ ov, ov32 = div_overflow, div_overflow
# arithmetic overflow can be done by analysing the input and output
elif len(inputs) >= 2:
output = outputs[0]
so = so | ov
self.spr['XER'][XER_bits['SO']] = so
- def handle_comparison(self, outputs):
+ def handle_comparison(self, outputs, cr_idx=0):
out = outputs[0]
+ assert isinstance(out, SelectableInt), \
+ "out zero not a SelectableInt %s" % repr(outputs)
+ print("handle_comparison", out.bits, hex(out.value))
+ # TODO - XXX *processor* in 32-bit mode
+ # https://bugs.libre-soc.org/show_bug.cgi?id=424
+ # if is_32bit:
+ # o32 = exts(out.value, 32)
+ # print ("handle_comparison exts 32 bit", hex(o32))
out = exts(out.value, out.bits)
+ print("handle_comparison exts", hex(out))
zero = SelectableInt(out == 0, 1)
positive = SelectableInt(out > 0, 1)
negative = SelectableInt(out < 0, 1)
SO = self.spr['XER'][XER_bits['SO']]
+ print("handle_comparison SO", SO)
cr_field = selectconcat(negative, positive, zero, SO)
- self.crl[0].eq(cr_field)
+ self.crl[cr_idx].eq(cr_field)
def set_pc(self, pc_val):
self.namespace['NIA'] = SelectableInt(pc_val, 64)
- self.pc.update(self.namespace)
+ self.pc.update(self.namespace, self.is_svp64_mode)
def setup_one(self):
"""set up one instruction
if ins is None:
raise KeyError("no instruction at 0x%x" % pc)
print("setup: 0x%x 0x%x %s" % (pc, ins & 0xffffffff, bin(ins)))
- print ("CIA NIA", self.respect_pc, self.pc.CIA.value, self.pc.NIA.value)
+ print("CIA NIA", self.respect_pc, self.pc.CIA.value, self.pc.NIA.value)
+ yield self.dec2.sv_rm.eq(0)
yield self.dec2.dec.raw_opcode_in.eq(ins & 0xffffffff)
- yield self.dec2.dec.bigendian.eq(0) # little / big?
+ yield self.dec2.dec.bigendian.eq(self.bigendian)
+ yield self.dec2.state.msr.eq(self.msr.value)
+ yield self.dec2.state.pc.eq(pc)
+ yield self.dec2.state.svstate.eq(self.svstate.spr.value)
+
+ # SVP64. first, check if the opcode is EXT001, and SVP64 id bits set
+ yield Settle()
+ opcode = yield self.dec2.dec.opcode_in
+ pfx = SVP64PrefixFields() # TODO should probably use SVP64PrefixDecoder
+ pfx.insn.value = opcode
+ major = pfx.major.asint(msb0=True) # MSB0 inversion
+ print ("prefix test: opcode:", major, bin(major),
+ pfx.insn[7] == 0b1, pfx.insn[9] == 0b1)
+ self.is_svp64_mode = ((major == 0b000001) and
+ pfx.insn[7].value == 0b1 and
+ pfx.insn[9].value == 0b1)
+ self.pc.update_nia(self.is_svp64_mode)
+ if not self.is_svp64_mode:
+ return
+
+ # in SVP64 mode. decode/print out svp64 prefix, get v3.0B instruction
+ print ("svp64.rm", bin(pfx.rm.asint(msb0=True)))
+ print (" svstate.vl", self.svstate.vl.asint(msb0=True))
+ print (" svstate.mvl", self.svstate.maxvl.asint(msb0=True))
+ sv_rm = pfx.rm.asint(msb0=True)
+ ins = self.imem.ld(pc+4, 4, False, True)
+ print(" svsetup: 0x%x 0x%x %s" % (pc+4, ins & 0xffffffff, bin(ins)))
+ yield self.dec2.dec.raw_opcode_in.eq(ins & 0xffffffff) # v3.0B suffix
+ yield self.dec2.sv_rm.eq(sv_rm) # svp64 prefix
+ yield Settle()
def execute_one(self):
"""execute one instruction
"""
# get the disassembly code for this instruction
- code = self.disassembly[self._pc]
- print("sim-execute", hex(self._pc), code)
+ if self.is_svp64_mode:
+ code = self.disassembly[self._pc+4]
+ print(" svp64 sim-execute", hex(self._pc), code)
+ else:
+ code = self.disassembly[self._pc]
+ print("sim-execute", hex(self._pc), code)
opname = code.split(' ')[0]
yield from self.call(opname)
+ # don't use this except in special circumstances
if not self.respect_pc:
self.fake_pc += 4
- print ("execute one, CIA NIA", self.pc.CIA.value, self.pc.NIA.value)
+
+ print("execute one, CIA NIA", self.pc.CIA.value, self.pc.NIA.value)
def get_assembly_name(self):
# TODO, asmregs is from the spec, e.g. add RT,RA,RB
# see http://bugs.libre-riscv.org/show_bug.cgi?id=282
+ dec_insn = yield self.dec2.e.do.insn
asmcode = yield self.dec2.dec.op.asmcode
+ print("get assembly name asmcode", asmcode, hex(dec_insn))
asmop = insns.get(asmcode, None)
+ int_op = yield self.dec2.dec.op.internal_op
# sigh reconstruct the assembly instruction name
- ov_en = yield self.dec2.e.oe.oe
- ov_ok = yield self.dec2.e.oe.ok
- if ov_en & ov_ok:
- asmop += "."
- lk = yield self.dec2.e.lk
- if lk:
- asmop += "l"
- int_op = yield self.dec2.dec.op.internal_op
- print ("int_op", int_op)
- if int_op in [InternalOp.OP_B.value, InternalOp.OP_BC.value]:
+ if hasattr(self.dec2.e.do, "oe"):
+ ov_en = yield self.dec2.e.do.oe.oe
+ ov_ok = yield self.dec2.e.do.oe.ok
+ else:
+ ov_en = False
+ ov_ok = False
+ if hasattr(self.dec2.e.do, "rc"):
+ rc_en = yield self.dec2.e.do.rc.rc
+ rc_ok = yield self.dec2.e.do.rc.ok
+ else:
+ rc_en = False
+ rc_ok = False
+ # grrrr have to special-case MUL op (see DecodeOE)
+ print("ov %d en %d rc %d en %d op %d" %
+ (ov_ok, ov_en, rc_ok, rc_en, int_op))
+ if int_op in [MicrOp.OP_MUL_H64.value, MicrOp.OP_MUL_H32.value]:
+ print("mul op")
+ if rc_en & rc_ok:
+ asmop += "."
+ else:
+ if not asmop.endswith("."): # don't add "." to "andis."
+ if rc_en & rc_ok:
+ asmop += "."
+ if hasattr(self.dec2.e.do, "lk"):
+ lk = yield self.dec2.e.do.lk
+ if lk:
+ asmop += "l"
+ print("int_op", int_op)
+ if int_op in [MicrOp.OP_B.value, MicrOp.OP_BC.value]:
AA = yield self.dec2.dec.fields.FormI.AA[0:-1]
- print ("AA", AA)
+ print("AA", AA)
if AA:
asmop += "a"
- if int_op == InternalOp.OP_MFCR.value:
- dec_insn = yield self.dec2.e.insn
- if dec_insn & (1<<20) != 0: # sigh
+ spr_msb = yield from self.get_spr_msb()
+ if int_op == MicrOp.OP_MFCR.value:
+ if spr_msb:
asmop = 'mfocrf'
else:
asmop = 'mfcr'
# XXX TODO: for whatever weird reason this doesn't work
# https://bugs.libre-soc.org/show_bug.cgi?id=390
- if int_op == InternalOp.OP_MTCRF.value:
- dec_insn = yield self.dec2.e.insn
- if dec_insn & (1<<20) != 0: # sigh
+ if int_op == MicrOp.OP_MTCRF.value:
+ if spr_msb:
asmop = 'mtocrf'
else:
asmop = 'mtcrf'
return asmop
+ def get_spr_msb(self):
+ dec_insn = yield self.dec2.e.do.insn
+ return dec_insn & (1 << 20) != 0 # sigh - XFF.spr[-1]?
+
def call(self, name):
+ """call(opcode) - the primary execution point for instructions
+ """
+ name = name.strip() # remove spaces if not already done so
+ if self.halted:
+ print("halted - not executing", name)
+ return
+
# TODO, asmregs is from the spec, e.g. add RT,RA,RB
# see http://bugs.libre-riscv.org/show_bug.cgi?id=282
asmop = yield from self.get_assembly_name()
- print ("call", name, asmop)
+ print("call", name, asmop)
+
+ # check privileged
+ int_op = yield self.dec2.dec.op.internal_op
+ spr_msb = yield from self.get_spr_msb()
+
+ instr_is_privileged = False
+ if int_op in [MicrOp.OP_ATTN.value,
+ MicrOp.OP_MFMSR.value,
+ MicrOp.OP_MTMSR.value,
+ MicrOp.OP_MTMSRD.value,
+ # TODO: OP_TLBIE
+ MicrOp.OP_RFID.value]:
+ instr_is_privileged = True
+ if int_op in [MicrOp.OP_MFSPR.value,
+ MicrOp.OP_MTSPR.value] and spr_msb:
+ instr_is_privileged = True
+
+ print("is priv", instr_is_privileged, hex(self.msr.value),
+ self.msr[MSRb.PR])
+ # check MSR priv bit and whether op is privileged: if so, throw trap
+ if instr_is_privileged and self.msr[MSRb.PR] == 1:
+ self.TRAP(0x700, PIb.PRIV)
+ self.namespace['NIA'] = self.trap_nia
+ self.pc.update(self.namespace, self.is_svp64_mode)
+ return
+
+ # check halted condition
+ if name == 'attn':
+ self.halted = True
+ return
+
+ # check illegal instruction
+ illegal = False
if name not in ['mtcrf', 'mtocrf']:
- assert name == asmop, "name %s != %s" % (name, asmop)
+ illegal = name != asmop
+
+ if illegal:
+ print("illegal", name, asmop)
+ self.TRAP(0x700, PIb.ILLEG)
+ self.namespace['NIA'] = self.trap_nia
+ self.pc.update(self.namespace, self.is_svp64_mode)
+ print("name %s != %s - calling ILLEGAL trap, PC: %x" %
+ (name, asmop, self.pc.CIA.value))
+ return
info = self.instrs[name]
yield from self.prep_namespace(info.form, info.op_fields)
# preserve order of register names
- input_names = create_args(list(info.read_regs) + list(info.uninit_regs))
+ input_names = create_args(list(info.read_regs) +
+ list(info.uninit_regs))
print(input_names)
- # main registers (RT, RA ...)
+ # get SVP64 entry for the current instruction
+ sv_rm = self.svp64rm.instrs.get(name)
+ if sv_rm is not None:
+ dest_cr, src_cr, src_byname, dest_byname = decode_extra(sv_rm)
+ else:
+ dest_cr, src_cr, src_byname, dest_byname = False, False, {}, {}
+ print ("sv rm", sv_rm, dest_cr, src_cr, src_byname, dest_byname)
+
+ # get SVSTATE srcstep. TODO: dststep (twin predication)
+ srcstep = self.svstate.srcstep.asint(msb0=True)
+ vl = self.svstate.vl.asint(msb0=True)
+ mvl = self.svstate.maxvl.asint(msb0=True)
+
+ # VL=0 in SVP64 mode means "do nothing: skip instruction"
+ if self.is_svp64_mode and vl == 0:
+ self.pc.update(self.namespace, self.is_svp64_mode)
+ print("end of call", self.namespace['CIA'], self.namespace['NIA'])
+ return
+
+ # main input registers (RT, RA ...)
inputs = []
for name in input_names:
- regnum = yield getattr(self.decoder, name)
+ # using PowerDecoder2, first, find the decoder index.
+ # (mapping name RA RB RC RS to in1, in2, in3)
+ regnum, is_vec = yield from get_pdecode_idx_in(self.dec2, name)
+ if regnum is None:
+ # doing this is not part of svp64, it's because output
+ # registers, to be modified, need to be in the namespace.
+ regnum, is_vec = yield from get_pdecode_idx_out(self.dec2, name)
+ # here's where we go "vector". TODO: zero-testing (RA_IS_ZERO)
+ # XXX already done by PowerDecoder2, now
+ #if is_vec:
+ # regnum += srcstep # TODO, elwidth overrides
+
+ # in case getting the register number is needed, _RA, _RB
regname = "_" + name
self.namespace[regname] = regnum
- print('reading reg %d' % regnum)
- inputs.append(self.gpr(regnum))
+ print('reading reg %s %d' % (name, regnum), is_vec)
+ reg_val = self.gpr(regnum)
+ inputs.append(reg_val)
# "special" registers
for special in info.special_regs:
# clear trap (trap) NIA
self.trap_nia = None
- print(inputs)
+ print("inputs", inputs)
results = info.func(self, *inputs)
- print(results)
+ print("results", results)
# "inject" decorator takes namespace from function locals: we need to
# overwrite NIA being overwritten (sigh)
if self.trap_nia is not None:
self.namespace['NIA'] = self.trap_nia
- print ("after func", self.namespace['CIA'], self.namespace['NIA'])
+ print("after func", self.namespace['CIA'], self.namespace['NIA'])
# detect if CA/CA32 already in outputs (sra*, basically)
already_done = 0
if name == 'CA32':
already_done |= 2
- print ("carry already done?", bin(already_done))
- carry_en = yield self.dec2.e.output_carry
+ print("carry already done?", bin(already_done))
+ if hasattr(self.dec2.e.do, "output_carry"):
+ carry_en = yield self.dec2.e.do.output_carry
+ else:
+ carry_en = False
if carry_en:
yield from self.handle_carry_(inputs, results, already_done)
if name == 'overflow':
overflow = output
- ov_en = yield self.dec2.e.oe.oe
- ov_ok = yield self.dec2.e.oe.ok
- print ("internal overflow", overflow)
+ if hasattr(self.dec2.e.do, "oe"):
+ ov_en = yield self.dec2.e.do.oe.oe
+ ov_ok = yield self.dec2.e.do.oe.ok
+ else:
+ ov_en = False
+ ov_ok = False
+ print("internal overflow", overflow, ov_en, ov_ok)
if ov_en & ov_ok:
yield from self.handle_overflow(inputs, results, overflow)
- rc_en = yield self.dec2.e.rc.data
+ if hasattr(self.dec2.e.do, "rc"):
+ rc_en = yield self.dec2.e.do.rc.rc
+ else:
+ rc_en = False
if rc_en:
- self.handle_comparison(results)
+ regnum, is_vec = yield from get_pdecode_cr_out(self.dec2, "CR0")
+ self.handle_comparison(results, regnum)
# any modified return results?
if info.write_regs:
for name, output in zip(output_names, results):
- if name == 'overflow': # ignore, done already (above)
+ if name == 'overflow': # ignore, done already (above)
continue
if isinstance(output, int):
output = SelectableInt(output, 256)
if name in ['CA', 'CA32']:
if carry_en:
- print ("writing %s to XER" % name, output)
+ print("writing %s to XER" % name, output)
self.spr['XER'][XER_bits[name]] = output.value
else:
- print ("NOT writing %s to XER" % name, output)
+ print("NOT writing %s to XER" % name, output)
elif name in info.special_regs:
print('writing special %s' % name, output, special_sprs)
if name in special_sprs:
else:
self.namespace[name].eq(output)
if name == 'MSR':
- print ('msr written', hex(self.msr.value))
+ print('msr written', hex(self.msr.value))
else:
- regnum = yield getattr(self.decoder, name)
- print('writing reg %d %s' % (regnum, str(output)))
+ regnum, is_vec = yield from get_pdecode_idx_out(self.dec2,
+ name)
+ if regnum is None:
+ # temporary hack for not having 2nd output
+ regnum = yield getattr(self.decoder, name)
+ is_vec = False
+ print('writing reg %d %s' % (regnum, str(output)), is_vec)
if output.bits > 64:
output = SelectableInt(output.value, 64)
self.gpr[regnum] = output
- print ("end of call", self.namespace['CIA'], self.namespace['NIA'])
+ # check if it is the SVSTATE.src/dest step that needs incrementing
+ # this is our Sub-Program-Counter loop from 0 to VL-1
+ if self.is_svp64_mode:
+ # XXX twin predication TODO
+ vl = self.svstate.vl.asint(msb0=True)
+ mvl = self.svstate.maxvl.asint(msb0=True)
+ srcstep = self.svstate.srcstep.asint(msb0=True)
+ print (" svstate.vl", vl)
+ print (" svstate.mvl", mvl)
+ print (" svstate.srcstep", srcstep)
+ # check if srcstep needs incrementing by one, stop PC advancing
+ # svp64 loop can end early if the dest is scalar
+ svp64_dest_vector = not (yield self.dec2.no_out_vec)
+ if svp64_dest_vector and srcstep != vl-1:
+ self.svstate.srcstep += SelectableInt(1, 7)
+ self.pc.NIA.value = self.pc.CIA.value
+ self.namespace['NIA'] = self.pc.NIA
+ print("end of sub-pc call", self.namespace['CIA'],
+ self.namespace['NIA'])
+ return # DO NOT allow PC to update whilst Sub-PC loop running
+ # reset to zero
+ self.svstate.srcstep[0:7] = 0
+ print (" svstate.srcstep loop end (PC to update)")
+ self.pc.update_nia(self.is_svp64_mode)
+ self.namespace['NIA'] = self.pc.NIA
+
# UPDATE program counter
- self.pc.update(self.namespace)
+ self.pc.update(self.namespace, self.is_svp64_mode)
+ print("end of call", self.namespace['CIA'], self.namespace['NIA'])
def inject():
except AttributeError:
func_globals = func.func_globals # Earlier versions.
- context = args[0].namespace # variables to be injected
+ context = args[0].namespace # variables to be injected
saved_values = func_globals.copy() # Shallow copy of dict.
func_globals.update(context)
result = func(*args, **kwargs)
- print ("globals after", func_globals['CIA'], func_globals['NIA'])
- print ("args[0]", args[0].namespace['CIA'],
- args[0].namespace['NIA'])
+ print("globals after", func_globals['CIA'], func_globals['NIA'])
+ print("args[0]", args[0].namespace['CIA'],
+ args[0].namespace['NIA'])
args[0].namespace = func_globals
#exec (func.__code__, func_globals)
- #finally:
+ # finally:
# func_globals = saved_values # Undo changes.
return result
return variable_injector
+
+# very quick test of maskgen function (TODO, move to util later)
+if __name__ == '__main__':
+ shift = SelectableInt(5, 6)
+ mask = genmask(shift, 43)
+ print (" mask", bin(mask.value))
+
+ mem = Mem(row_bytes=8)
+ mem = RADIX(mem, None)
+ # -----------------------------------------------
+ # |/|RTS1|/| RPDB | RTS2 | RPDS |
+ # -----------------------------------------------
+ # |0|1 2|3|4 55|56 58|59 63|
+ data = SelectableInt(0, 64)
+ data[1:3] = 0b01
+ data[56:59] = 0b11
+ data[59:64] = 0b01101 # mask
+ data[55] = 1
+ (rts, mbits, pgbase) = mem._decode_prte(data)
+ print (" rts", bin(rts.value), rts.bits)
+ print (" mbits", bin(mbits.value), mbits.bits)
+ print (" pgbase", hex(pgbase.value), pgbase.bits)
+ addr = SelectableInt(0x1000, 64)
+ check = mem._segment_check(addr, mbits, shift)
+ print (" segment check", check)