nir: Remove the old nir_opt_shrink_load.

The old pass only handled intrinsic load_constant, while the new
nir_opt_shrink_vectors handles ALU ops, nir load_consts, along with all
the load intrinsics.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6050>

amd: Swap from nir_opt_shrink_load() to nir_opt_shrink_vectors().

This should do much more trimming than shrink_load, and is a win on i965's
vec4 and nir-to-tgsi.  For scalar backends like this that don't need ALU
shrinking, it still gets more load intrinsics covered.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6050>

i965: Enable vector shrinking in the vec4 backend.

This manages to make some extra vec operations that would turn into movs
go away.

brw shader-db:
total instructions in shared programs: 3895037 -> 3893221 (-0.05%)
total cycles in shared programs: 113832759 -> 113792154 (-0.04%)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6050>

nir: Add a pass to cut the trailing ends of vectors.

Ideally we'd also handle unused middles of vectors and reswizzle ALU-only
uses of it so we could write fewer channels, but that's future work/

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6050>

turnip: workaround for a630 d24_unorm_s8_uint fails

A630 doesn't have the HW format we use to sample stencil, so it needs a
workaround. It also has a bug around the AS_R8G8B8A8 format, which doesn't
work when UBWC is disabled, so use 8_8_8_8_UNORM instead when UBWC is
disabled (using AS_R8G8B8A8 or 8_8_8_8_UNORM should only matter with UBWC)

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5438>

etnaviv: fix nir validation problem

Fixes the following validation problem:
  error: nir_intrinsic_align_offset(instr) < nir_intrinsic_align_mul(instr)

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Lukas F. Hartmann <lukas@mntmn.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6127>

freedreno/decode: move dependencies up a level

This is mainly for the benefit of automated syncing of changes from mesa
back to envytools, where the same subdir meson.build's are used, but the
toplevel meson.build is different.  In the envytools case, we want these
depenendencies to be required.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6154>

freedreno/registers: install gzip'd register database

The decode tools aren't too useful to install without the xml.  But
since libxml2 can read compressed xml, we'll gzip them for installation.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6154>

freedreno/registers: split header build into subdirs

Instead of building the adreno/foo.xml headers from the toplevel, split
out a subdir().  This fits better with how meson likes things to be
structured.  But it does require fixing a bit about how gen_header.py
resolves imports, ie. it cannot assume the src file is at the root of
the $RNN_PATH.

This is needed for the next patch, to add support for installing the
register database for use with installed tools.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6154>

freedreno/registers: add .gitignore

Testing headergen2 will create .xml.h in the same location as the .xml.
But we don't want this to get accidentially committed.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6154>

freedreno/rnn: rework RNN_DEF_PATH construction

No need for rnn_path.h, just construct the whole thing in meson and pass
via c_args.  Also move where the path is constructed up one level.  This
will be needed for syncing back to envytools, where the path will be
different.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6154>

freedreno/rnn: also look for .xml.gz

libxml2 can load gzip compressed files, so lets look for these too.
This will be useful for installing the register database so that an
installed cffdump/crashdec can use them.  But it isn't too useful
to be able to edit the installed register database, so we can gzip
them to use less disk space.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6154>

radv: Implement VK_EXT_4444_formats

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6160>

anv: Implement VK_EXT_4444_formats

We only support the ARGB format, not the ABGR one.  Fortunately, the
ARGB is the one required by D3D11.

Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6158>

vulkan: Update Vulkan XML and headers to 1.2.149

Reviewed-by Joshua Ashton <joshua@froggi.es>

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6158>

u_prim_restart: add inline function for getting restart index based on index size

handy to have this available for drivers to reuse

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6147>

iris: Zero the add-on clear color BO on import

When iris imports an I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS surface, it
allocates a buffer to hold the indirect clear color. When the import is
complete, iris_resource::aux::clear_color is set to zero but the
indirect buffer is filled with garbage values. This could break certain
texture view use-cases, so zero the allocated buffer to fix those.

Fixes: c19492bcdb9 ("iris: Handle importing aux-enabled surfaces on TGL")
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6092>

ci: Build-test Panfrost tools

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3348
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6157>

zink: implement handling for VK_EXT_calibrated_timestamps

just the extension setup; we need this to handle device timestamp
queries outside of batches

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5913>

zink: store valid timestamp bits onto zink_screen

we need this for converting timestamp ticks to nonoseconds

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5913>

zink: handle VK_EXT_vertex_attribute_divisor setup

this just enables the extension

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5913>

zink: clamp PIPE_SHADER_CAP_MAX_SHADER_BUFFERS to PIPE_MAX_SHADER_BUFFERS

this value gets split between ssbos and abos, so clamping to 8 here causes
a number of tests to fail just because there's not enough buffers available

other gallium drivers return 32 here, so this seems pretty safe

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5913>

zink: implement VK_EXT_robustness2

this adds support for null descriptors, which is necessary for full
compliance with ARB_texture_buffer_object

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5913>

pan/mdg: Test for SSA before chasing addresses

It's possible an SSA value depends on a register; in this case, chasing
the source would result in a crash as the chase helper in NIR asserts
is_ssa. Instead we should check a priori that all the argments are in
fact SSA, bailing otherwise.

In the piglit shader exhibiting this bug (by looping over the index),
bailing on the ishl instruction is -necessary-. This is not merely us
being cowardly to avoid seeing through the registers; indeed, if we
wrote away the ishl instruction, the shift itself would have to be
stored in a load/store register (r26/r27) which would preclude reading
it in the loop, creating a register allocation failure later in the
compile. So this is the correct solution due to the restricted
semantics.

Closes #3286

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-by: Icecream95 <ixn@keemail.me>
Fixes: f5401cb8866 ("pan/midgard: Add address analysis framework")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6144>

pan/mdg: Mask spills from texture write

This prevents RA failures the results of reading multiple textures that
require less than 4 channels, as seen in a number of GL 3 WebRender shaders.

Closes: #3342
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-by: Icecream95 <ixn@keemail.me>
Tested-by: Icecream95 <ixn@keemail.me>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6144>

swr: Bump maximum 2D texture size to 16kx16k

This may be required by some applications, even though
not all texture formats will be below 2GB limit.

This change also increases the maximum size of render target,
that was inadvertently lowered some time ago.

Reviewed-by: Krzysztof Raszkowski <krzysztof.raszkowski@intel.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6139>

mesa/st: Actually free the driver part of memory objects on destruction.

_mesa_delete_memory_object(ctx, obj) == free(obj) but doesn't free the
part of the gallium driver.

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/1206
Fixes: 49f4ecc6777 "mesa/st: start adding memory object support"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6148>

gallivm/nir: Lower uniforms to UBOs in llvm draw if the driver didn't request this already

When the llvm draw engine is used for draw shaders in st_program the driver
may not enable the cap PIPE_CAP_PACKED_UNIFORMS, so uniforms are not
be lowered to UBOs. However, llvm doesn't support nir_load_uniform, so lower
the uniforms to UBO now. The multiplier is set to 16 to be the same like in
the TGSI code path.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5681>

android: freedreno: move a2xx disasm out of gallium

Fixes the following building errors:

clang: error: no such file or directory: 'external/mesa/src/gallium/drivers/freedreno/a2xx/disasm-a2xx.c'
clang: error: no input files

FAILED: out/target/product/x86_64/obj/SHARED_LIBRARIES/gallium_dri_intermediates/LINKED/gallium_dri.so
ld.lld: error: undefined symbol: disasm_a2xx
>>> referenced by ir2_assemble.c:546 (external/mesa/src/gallium/drivers/freedreno/a2xx/ir2_assemble.c:546)
>>>               ir2_assemble.o:(assemble) in archive out/target/product/x86_64/obj/STATIC_LIBRARIES/libmesa_pipe_freedreno_intermediates/libmesa_pipe_freedreno.a
clang-9: error: linker command failed with exit code 1 (use -v to see invocation)

Fixes: f39afda1a7a ("freedreno: move a2xx disasm out of gallium")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6151>

android: freedreno/common: add support for libfreedreno_common static

Porting of meson build rules to Android

Fixes: 9623debf48a ("freedreno: Centralize UUID generation into new files freedreno_uuid.c/h")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6151>

android: freedreno/ir3: fix include paths

Fixes the following building error:

external/mesa/src/freedreno/ir3/disasm-a3xx.c:33:10: fatal error: 'disasm.h' file not found
#include "disasm.h"
         ^~~~~~~~~~
1 error generated.

Fixes: f7bd3456d79 ("freedreno: deduplicate a3xx+ disasm")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6151>

android: freedreno/registers: fix generated headers rules

Fixes the following building errors:

FAILED: ninja: 'external/mesa/src/freedreno/registers/a2xx.xml',
needed by 'out/target/product/x86_64/gen/STATIC_LIBRARIES/libfreedreno_registers_intermediates/registers/a2xx.xml.h',
missing and no known rule to make it
...
FAILED: ninja: 'external/mesa/src/freedreno/registers/adreno-pm4-pack.xml.h',
needed by 'out/target/product/x86_64/gen/STATIC_LIBRARIES/libfreedreno_registers_intermediates/registers/adreno-pm4-pack.xml.h',
missing and no known rule to make it

Fixes: b721d336da9 ("freedreno: slurp in rnndb")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6151>

anv: toggle on VK_EXT_extended_dynamic_state

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: dynamic vertex input binding stride and size support

If pStrides or Psizes are NULL we should use the values defined by the
pipeline.

v2: fix commit message and fix the code to set explicitly if we are
    using dynamic stride/size

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: depth/stencil dynamic state support

v2: code cleanup, remove extra spaces (Lionel)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: add support for dynamic primitive topology change

This is done using 3DSTATE_VF_TOPOLOGY packet that overrides topology
used in subsequent 3DPRIMITIVE commands. For gen7[5] we override the
pipeline topology when emitting draw commands.

v2: fix the way gen7[5] is handled (Lionel)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: add support for dynamic viewport and scissor with count

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: add support for dynamic cull mode and winding order

v2: cleanup, white space issues (Lionel)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: handle dynamic viewport count

Emit 3DSTATE_CLIP during cmd_buffer_flush_state so that we can change
the max viewport count dynamically.

v2: use one common clip state as size is the same for all gens (Lionel)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: consider dynamic state when creating pipeline

Leave default state values as zero so that when we OR them later
it is only the dynamic state value that matters.

v2: code cleanup + skip topology emit in base batch
    when topology is dynamic (Lionel)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: add new dynamic states

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

anv: add VK_EXT_extended_dynamic_state but leave it disabled

This is needed to ensure the function prototypes are declared.

v2: tweak commit message (Jason)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5604>

meson: fix `-D xlib-lease=auto` detection

This is used by Vulkan, not EGL, and depends on having DRM/KMS, not GBM.

Reported-by: Oschowa <oschowa@web.de>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3346
Fixes: e00adef34a5ce485e2c9 ("egl: automatically compile the `drm` platform when available")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6150>

egl: consistently use dri2_egl_display() helper macro

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6133>

freedreno/afuc: Fix PM4 enum parsing

We were open-coding it, and getting variant parsing wrong for things
like "A4XX-" which don't explicitly include the version being
disassembled. Use the rnn function instead. This makes CP_INDIRECT show
up again. Also propagate const-ness to users.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6140>

freedreno/afuc: Add missing rnn_prepdb()

It's totally not obvious, but this runs extra error checking and is
necessary for correct variant handling, and variant handling will
silently not work if it's not enabled. Add it asm.c even though it's not
strictly necessary, to prevent anyone from missing this in the future.

Missing this really should be an error.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6140>

freedreno/cffdec: Stop open-coding enum parsing

Now that rnndec_decode_enum() has been fixed, it does the same thing as
this function.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6140>

freedreno/rnn: Make rnn_decode_enum() respect variants

We'll need this for afuc, and we're currently also open-coding the same
thing in rnnutils. It seems this function was added to decode pm4 packet
names, but it currently has no users, so make it useful for what it
was intended to do.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6140>

egl/haiku: drop overwritten preset of EGL version

`init_haiku()` is called by `eglInitialize()`, which then calls
`_eglComputeVersion()` (without even anything in between). The latter
sets the EGL version based on the extensions supported, and since Haiku
doesn't support any it will end up overwriting the same `1.4` value.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6131>

egl: const _eglDriver

Converted using `s/_EGLDriver/const _EGLDriver/g` and dropped a couple
of irrelevant changes in comments, in the `_EGL_DRIVER_TYPECAST()` macro
and the typedef itself.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6129>

egl: Allow software rendering for vgem/virtio_gpu in platform_device

Then user could explicitly choose the underlying device for software
rendering when both vgem/virtio_vga are there.

Signed-off-by: Lepton Wu <lepton@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5830>

intel/tools: Test notification subregisters

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Simplify notification register handling

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Don't hardcode notification register

Previously we parsed a src non-terminal but did nothing with it. Since
the WAIT instruction is kind of weird, in that you have to give it the
same notification subregister for both destination and source, and it
always has an exec size of 1, let's parse a destination instead of a
source. This way, we can parse a writemask rather than a swizzle in
align16 mode, and easily convert the writemask to a swizzle to create
the source register.

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Manually set ARF register file/nr/subnr

brw_reg::subnr is in bytes, like the subnr field in the instruction
word, but we disassemble the subregister number in units of the type.
For example g0.3<1>F would have a subnr=12.

These non-terminals produce a brw_reg and feed into other non-terminals
that call brw_reg(), where they are passed the subnr that we set here.
brw_reg()'s subnr parameter is expected to be in terms of the register
type, and it is multiplied by the type size to calculate the subnr in
bytes.

In these non-terminals, we don't know the register type yet, so we
must store the subregister number as it was given to us in the .subnr
field and let the brw_reg() constructor handle the conversion to the
canonical byte-based subnr form when it knows the type.

Before this patch, subregister numbers applied to these registers would
be multiplied with the type size twice.

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Pass integers, not enums, to stride()

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/compiler: Relax SENDS regioning assertions

The next commit fixes a mistake in the assembler and ends up running
afoul of this assertion.

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Simplify dstregion

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Simplify immediate handling

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Make writemask an integer

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Make swizzle an integer

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Simplify register type handling

Produce a brw_reg_type rather than a whole brw_reg and rename a few
non-terminals.

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Don't allow empty type specifier

It's preferable to require an explicit type.

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Remove stray newline

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

intel/tools: Fix typos

Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5956>

pan/bit: Remove BI_SHIFT stub

Fixes compile error with -Dtools=panfrost

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes: 946ff9b4396 ("bifrost: Add support for nir_op_ishl")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6142>

pan/bit: Update f32->f16 convert test

Needs a second argument to be consistent with the real IR and the
hardware instruction.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes: 8a4efe2d730 ("pan/bi: Pack second argument of F32_TO_F16")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6142>

ci: Set date in LAVA DUTs from NTP servers

The MinIO server is sometimes complaining about the submitted date being
too off.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6135>

docs: Explain how to set up a personal gitlab runner.

I'm not the only one doing it, so document it, especially since there's a
new trick as of
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5669

Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5988>

freedreno/a6xx: Fix CP_BIN_SIZE_ADDRESS name

Also document some other registers gleaned from looking at the context
switch save/restore routines and fix CP_SDS_REM_SIZE, and make the names
line up with the CP perfcntr names. Note that the CP reads the draw
stream size in CP_SET_BIN_DATA5 using MEM_READ_ADDR, which is probably
why this was mistaken for the draw stream size address.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6123>

i965/i915: Add colorspace support to YUV sampling

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6122>

nir: Add colorspace support to YUV lowering pass

This change adds support for BT709 and BT2020 colorspace to the YUV
lowering pass. The default remains BT601.

This change also fixes minor imprecision in the last digits of the BT601
offsets due to computation from rounded values when the math was
simplified.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6122>

zink: add extension loading framework for spirv builder

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5969>

pan/mdg: emit REGISTER_UNUSED on unused ALU src2

This saves power and time by skipping a roundtrip to the register file.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6128>

mapi: Return NULL function pointers for GL_EXT_debug_marker

Mesa returns a stub function pointer to glAnything for years.
Android framework till API level 30 just uses function pointers
returned from eglGetProcAddress without checking if the underlying
extension is supported. If we return stub pointers for functions
in GL_EXT_debug_marker, Android just uses our stub functions instead
of its own stubs and then fail the dEQP. In the past, the issue
didn't show up because mesa only has limited slots and run out of slots
before Android calls eglGetProcAddress on functions inside
GL_EXT_debug_marker.

Signed-off-by: Lepton Wu <lepton@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5652>

egl: drop left-over function prototype

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6037>

egl: rename _eglMatchDriver() to _eglInitializeDisplay()

... and fix the comment to better reflect what this really does.

The whole "match a driver at runtime" thing has been gone for years.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6037>

egl: inline _eglMatchAndInitialize() and refactor _eglMatchDriver()

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6037>

egl: fix _eglMatchDriver() return type

The one caller only ever checks if the return value is NULL or not, so
let's simplify the function by only returning that information.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6037>

egl: drop unnecessary _eglGetDriver()

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6037>

egl: replace _eglInitDriver() with a simple variable

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6037>

pan/mdg: remove ins->br_compact and ins->branch_extended

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: defer branch packing

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: refactor emit_alu_bundle

This refactor prepares emit_alu_bundle() for the next commit that
reconstructs branch instructions right before emission.
It also simplifies the code since the previous control flow was only
better when we had the prepacked fields in midgard_instruction.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: remove ins->alu

This commit removes the `ins->alu` field from midgard_instruction,
simplifying the code by just recreating midgard_vector_alu later when we
have to emit it.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: externalize mir_pack_mod

midgard_print.c requires mir_pack_mod to remove references to ins->alu.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: defer register packing

This commit moves the packing of registers and other things from
install_registers_instr() to midgard_emit.c, right before emitting the
binary.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: eliminate references to ins->load_store.op

This commit makes `ins->op` the correct field to use with load_store
instructions.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: eliminate references to ins->texture.op

This commit makes the `ins->op` the correct field to use with texture
instructions.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: apply float outmods to textures

Texture instructions in midgard support float outmods, this commit makes
it so these instructions are emitted when the conditions are met.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: eliminate references to ins->alu.outmod

In an effort to simplify MIR by not prepacking instructions, this commit
removes references to `ins->alu.outmod` so that we can later remove the
`ins->alu` field from midgard_instruction.
Every place that was using `ins->alu.outmod` was changed to now use the
generic `ins->outmod` field instead.
We then reconstruct the outmod field right before emission.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: fix comment

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: eliminate references to ins->alu.reg_mode

In an effort to simplify MIR by not prepacking instructions, this commit
removes references to `ins->alu.reg_mode` so that we can later remove
the `ins->alu` field from midgard_instruction.
Every place that was using reg_mode was changed to now use the generic
`ins->src_type` field instead.
We then reconstruct the reg_mode field right before emission.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: eliminate references to ins->alu.op

In an effort to simplify MIR by not prepacking instructions, this commit
removes references to `ins->alu.op` so that we can later remove the
`ins->alu` field from midgard_instruction.
Every place that was using ins->op was changed to now use the generic
`ins->op` field instead.
We then reconstruct the `alu.op` field right before emission.
This new field is generic and can contain opcodes for ALU, texture or
load/store instructions. It should be used in conjunction with
`ins->type`, just like the current prepacked `op` field.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: prepare effective_writemask()

In the next commits we will be removing the `alu` field from
midgard_instruction in order to simplify the code.
effective_writemask() doesn't actually use `alu` for anything, it only
needs to know the opcode.

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

pan/mdg: fix src_type in instructions that need a implicit zero

We were incorrectly assuming uint32 for src_type[1] regardless of
src_type[0].

Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5933>

drm-shim: Return -EINVAL instead of abort()ing on unknown ioctls.

I had this as abort() in my original implementation since I was doing
drm-shim and my kernel driver in parallel based around using a SW
simulator, and I wanted to always update both, but it means that people's
new feature detection code can easily end up breaing their drm-shim
shader-db runs (such as intel's kernel_has_dynamic_config_support()
checking for -ENOENT instead of -EINVAL for a feature, which showed up on
my personal runner but not fd.o's for reasons I'm unclear on).

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5994>

u_prim_restart: handle indirect draws

this is pretty gross, but we need to map the indirect buffer to get the
index info and then use that for mapping the index buffer and translating
the restart index

Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5886>

panfrost: Android build fixes 2020 week 31

Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6109>

aco: optimize swizzled SALU 8/16-bit conversions

We only need one s_bfe for a conversion with a swizzled source.

shader-db (parallel-rdp, Navi):
Totals from 487 (71.30% of 683) affected shaders:
SpillSGPRs: 3284 -> 3233 (-1.55%); split: -2.71%, +1.16%
SpillVGPRs: 2174 -> 2150 (-1.10%); split: -1.24%, +0.14%
CodeSize: 2497864 -> 2445544 (-2.09%); split: -2.11%, +0.01%
Instrs: 450613 -> 445104 (-1.22%); split: -1.27%, +0.05%

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5259>