soclayout.git
2020-12-22 Luke Kenneth... add copy of experiments4 to create memory example
2020-12-04 Luke Kenneth... increase core size (again) to cope with DFFs currently...
2020-12-04 Luke Kenneth... Revert "very weird bug where CoreToChip.buildChip canno...
2020-12-03 Luke Kenneth... very weird bug where CoreToChip.buildChip cannot find...
2020-12-03 Luke Kenneth... increase size to 45,000 to cope with 3x extra SRAMs
2020-12-03 Luke Kenneth... experiment adding 3x extra SRAMs back in but still...
2020-12-03 Luke Kenneth... wtf does 32/64 bit bus have to do with gpio_o(8) disapp...
2020-12-03 Luke Kenneth... reduce mem width due to yosys bugs. sigh
2020-12-03 Luke Kenneth... added 3 more 4k SRAMs
2020-12-02 Luke Kenneth... increase size to 40,000
2020-12-02 Luke Kenneth... begin random search for appropriate core size. start...
2020-12-02 Luke Kenneth... add full core back in
2020-11-30 Luke Kenneth... update submodule for ls180 pinmux, iopad vss/vdd invers... partial-core-ls180-gdsii
2020-11-30 Jean-Paul ChaputAdded experiments11, base for full chip with FlexLib...
2020-11-27 Luke Kenneth... add comment do not use build.sh
2020-11-14 Luke Kenneth... update ls180 litex interfaces
2020-11-14 Luke Kenneth... get rid of ibus/dbus/xics advanced wishbone tags
2020-11-14 Luke Kenneth... update litex direction of iopads in ls180
2020-11-13 Luke Kenneth... corona-core gap too small
2020-11-13 Luke Kenneth... increase core size yet again, shrink gap
2020-11-13 Luke Kenneth... increase core size, reduce corona gap again
2020-11-13 Luke Kenneth... reduce nc ls180 pins to match
2020-11-13 Luke Kenneth... increase chip size by 100, make chipSize closer to...
2020-11-13 Luke Kenneth... fix clk_sel width (2 not 3)
2020-11-13 Luke Kenneth... trying to get yosys to stop destroying pll_lck_o signal
2020-11-13 Luke Kenneth... trying to get yosys to stop destroying pll_lck_o signal
2020-11-13 Luke Kenneth... update full core ls180 (actually with litex peripherals...
2020-11-13 Luke Kenneth... test of litex peripherals back in (not full core)
2020-11-12 Luke Kenneth... get core size big enough to fit pads along width
2020-11-12 Luke Kenneth... remove niolib io_in/out signal, no longer needed
2020-11-12 Luke Kenneth... remove io_in/io_out from niolib experiments10
2020-11-11 Luke Kenneth... submodule update
2020-11-11 Luke Kenneth... adjust chip/core size to try to fit ls180 core/pads
2020-11-11 Luke Kenneth... add power/ground pads
2020-11-11 Luke Kenneth... update CLKSEL / PLLOCK pins for ls180
2020-11-09 Luke Kenneth... add code comments for ioring-to-niolib conversion of...
2020-11-08 Luke Kenneth... start conversion of ls180 to new niolib
2020-11-07 Luke Kenneth... add io_in/io_out zero/one to help transition to new...
2020-11-07 Luke Kenneth... messing about to get non_generated ls180.vst running...
2020-11-07 Luke Kenneth... update full ls180 core
2020-11-05 Luke Kenneth... update to "full" core
2020-11-05 Luke Kenneth... add build scripts for ls180
2020-11-04 Luke Kenneth... minor reformat of spec, whitespace
2020-11-02 Luke Kenneth... add cmos45 to mksyms.sh
2020-11-02 Jean-Paul ChaputCompleted experiment10, adder with JTAG (dual clocks...
2020-10-25 Jean-Paul ChaputAdded one-clock generated add.vst.
2020-10-25 Jean-Paul ChaputExperiment10 switched to the new chip2core module.
2020-10-25 Luke Kenneth... update non_generated add.il for convenience
2020-10-24 Luke Kenneth... add feedback shift register back in
2020-10-22 Luke Kenneth... add non-generated add.il
2020-10-22 Luke Kenneth... add jtag IO to experiment10
2020-10-22 Luke Kenneth... add JTAG test
2020-10-22 Luke Kenneth... add experiments10, to add C4M JTAG
2020-10-04 Luke Kenneth... match up power/gnd numbers with pinmux
2020-10-04 Luke Kenneth... submodule update
2020-10-04 Luke Kenneth... use new extpower/intpower and pads.useCoreSize params
2020-10-04 Luke Kenneth... reduce number of not-connected
2020-10-04 Luke Kenneth... update experiment4 to use pads.useCoreSize
2020-10-02 Luke Kenneth... submodule update
2020-10-02 Luke Kenneth... update build.sh
2020-10-02 Luke Kenneth... add really cut down version of ls180.vst
2020-10-02 Luke Kenneth... really really cut down core
2020-10-02 Luke Kenneth... submodule update
2020-10-02 Luke Kenneth... move ioring to pinmux
2020-10-01 Luke Kenneth... update to new ls180.il (no core yet) with PLL I/O and I2C
2020-10-01 Luke Kenneth... sort sys_* pad names
2020-10-01 Luke Kenneth... add I2C, allow sys_clk_i and sys_pll_48_o out
2020-09-30 Luke Kenneth... increase core.size to 27500x27500
2020-09-30 Luke Kenneth... add full core ilang file
2020-09-30 Luke Kenneth... commented-out core.size and chip.size which would allow the
2020-09-30 Luke Kenneth... use publicly-accessible submodule
2020-09-30 Luke Kenneth... add build script for convenience
2020-09-30 Jean-Paul ChaputURL of submodule pinmux needs to use ssh/port 922.
2020-09-29 Luke Kenneth... add cki and ck to clock settings
2020-09-29 Luke Kenneth... updated ls180 (no core, testing)
2020-09-28 Luke Kenneth... add sdram_dm_1 back in
2020-09-28 Luke Kenneth... iopad pads.instances mapping
2020-09-28 Luke Kenneth... worked out how to do pad instances in experiment4
2020-09-28 Luke Kenneth... submodule update
2020-09-28 Luke Kenneth... remove unused cells for now
2020-09-28 Luke Kenneth... cut out core for now to focus on ioring
2020-09-28 Luke Kenneth... cut definition of clocks back to minimum
2020-09-28 Luke Kenneth... connect up dummy "NC" pins
2020-09-27 Luke Kenneth... Makefile add chip building
2020-09-27 Luke Kenneth... add soc ioring
2020-09-27 Luke Kenneth... add link to pinmux generation for use in ioring.py
2020-09-27 Luke Kenneth... add submodule pinmux
2020-09-19 Luke Kenneth... update ls180.il which successfully (except for 18 track...
2020-09-19 Luke Kenneth... redo litex gateware
2020-09-19 Luke Kenneth... first attempt putting in litex pins instead of bare...
2020-09-15 Jean-Paul ChaputUse Yosys flattening for top blocks.
2020-09-14 Jean-Paul ChaputConfiguration updated for test of HFNS.
2020-09-08 Luke Kenneth... new version of test_issuer.il
2020-08-24 Luke Kenneth... nuts. remove div pipe, use FSM
2020-08-24 Luke Kenneth... update to latest test_issuer.il
2020-08-13 Luke Kenneth... whitespace cleanup
2020-08-13 Luke Kenneth... update to binary-addressed int regfile
2020-08-13 Luke Kenneth... whoops must use "with" on CfgCache
2020-08-12 Jean-Paul ChaputAdded doDesignFlat.py to P&R issuer in a flat way.
2020-08-11 Jean-Paul ChaputCorrect taking in accounts of the parameters settings.
next